Focus on centrifugal pump manufacturing since 1989
E-mail:sales@zoomlian.com
You are at: Home Single Stage Pump Content

IS End Suction Circulating Water Pump

IS End Suction Circulating Water Pump


Capacity: 5.4-400 (m³/h) 

Head: 4-125 (m)

Temperature: 0-80 (℃)


Product Introduction

IS end suction centrifugal circulating water pump is single-stage single-suction centrifugal water pump, applied for industrial and urban water supply and drainage and agricultural irrigation. It is used for conveying water or physical and chemical properties similar to water. The medium temperature is not higher than 80 degrees centigrade, the inlet pressure is 0.6 MPa.

Main Benifits

Compact structure:
1. The pump body and its cover are separated by the back of the impeller
2. O type seal ring between shaft and shaft sleeve

 • High efficiency
 • Safe and reliable
 • Easy maintanence
 • Long service life
 • 
Energy conservation

Main Applications

 • Clean out system.
 • Food machining and medicine produce
 • Environment protecting system.
 • Waste water treatment for paper making, metallurgy, galvanization, smelting, dye.
 • Electroplate and Dyeing system.
 • Industrial and chemical sump treatment
 • Explosion proof motor for oil, alcohol and other explosive liquid

Technical Data

Product NameIS end suction circulating water pump
StructureSingle stage
MaterialCast iron
Head4-125 m / 13-410ft
Flow5.4-400 m3/h / 23.8-1760USgpm
Temperature0~80℃ / 0~176℉
Speed980r/min 1480r/min 2980 r/min
Power0.55-160 kw
Efficiency32%-85%
NPSH2-5.5 m
Liquid MediumNon-corrosive oils without solid particles
StandardISO9001

Structure Chart

 


Model Description

IS50-32-125A
IS ----------- Single stage single suction centrifugal water pump
50 ---------- Inlet diameter 50 mm
32 ---------- Outlet diameter 32 mm
125 -------- Diameter of the impeller 125 mm
A ----------- A,B,C refer to the first, the second, the third trim after the impeller respectively

E-mail
sales@zoomlian.com
Need to assist with pumps?